Sign In | Join Free | My portofva.com
China Sinuo Testing Equipment Co. , Limited logo
Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Verified Supplier

7 Years

Home > Medical Device Testing Equipment >

Medical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief

Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

Medical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief

Brand Name : Sinuo

Model Number : SN1112M

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Price : Customized

Payment Terms : T/T

Supply Ability : 10 sets per month

Delivery Time : 30 Days

Packaging Details : Plywood Case

Input power : AC220V 50HZ

Control method : PLC control

Drive mode : Servo motor drive

Clamping method : Mechanical clamping

Test station : 1 station

Flexing angle : 0-360°

Flexing rate : 0-60 times/m

Flexing times : 0~999999 times

Contact Now

ANSI/AAMI-EC53: 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief

Standard & Clauses:

AAMI-EC53-1998

ANSI/AAMI-EC53:2013/(R)2020 “ECG trunk cables and patient leadwires”

Specimen Range, Application, Principle, Structure and Use Environment:

Samples and Restrictions: EGA trunk cables and patient leadwires

Application: Used to test the bending resistance of EGA trunk cables and patient leadwires when the power cord enters the appliance. To verify its reliable performance.

Principle: Use a motor to drive the fixture to flex the sample. Apply current to the soft wire to make the sample flex left and right at a certain speed and angle of ±90°. And clamp the weight at a position 6 inches away from the lead outlet end of the sample. The test will automatically stop when the equipment reaches the test times or the soft wire is short-circuited.

Equipment structure and schematic diagram:

The equipment is driven by a servo motor, and the fixture is installed in the center. And the eccentricity is adjustable. When clamping the sample, the flexing axis and the point where the cord enters the appliance can coincide as much as possible. This results in minimal lateral displacement of the cord and load.

Equipment dimensions: approximately: 800×800×1300 (mm) W×H×D, equipment weight: 130kg

Medical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex ReliefMedical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief

Technical Parameters:

Test station Single
Electrical control method PLC and 7-inch touch screen
Drive mode Servo motor drive
Sample clamping method Mechanical clamping, the position of clamping point is adjustable
Flexing angle 0-360° adjustable arbitrarily (can be preset ±30°, ±45°, ±60°, ±90°)
Flexing rate 0-60 times/min, variable frequency speed regulation
Flexing times

0~999999 Can be preset and set according to standard table 1 requirements

Medical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief

Load weight

1. 0.23kg (±5%), 1 piece (weight tray).

2. 0.1kg, 10 pieces, (add weight, stack weight). Achieve standard 0.0072*π*d² (±5%)

Test judgment

1. Short circuit judgment

2. Disconnection judgment

Medical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief

Medical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief

Medical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief


Product Tags:

Leadwire Flex Relief Medical Material Tester

      

:ANSI/AAMI-EC53 Medical Material Tester

      
China Medical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief wholesale

Medical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Sinuo Testing Equipment Co. , Limited
*Subject:
*Message:
Characters Remaining: (0/3000)